Hotline: 090 343 3214

RKHD Power Rack

Key Features At A Glance
 
Pop-Up Ramps

  Pop-up ramps add wheelbase capacity while making efficient use of bay space. Automatic wheel stops engage when ramps are raised to up position. Ramp legs safely lock in over-center position at maximum rise.
 
Optional Jack Tray

  Optional Jack Tray with wheels and guides simplifies alignment and other service operations that require jacking. An option for bottle jacks is also available.
 
Lift Controls

  Lift controls require two hands for safer operation.

Recessed Pockets

  Recessed pockets are ready for optional turnplates.
 
Super-Wide Runways

  Super-wide 33-inch runways make drive-on/drive-off easy and safe.
 
Runway Sections

  An unlimited number of runway sections can be added to increase wheelbase capacity.

Approach Angle

  8° approach angle for drive-on clearance.
 
Non-Skid Surface

  Non-skid surface helps prevent wheel-spin.
 
Rub-Rails

  Inside rub-rails help prevent smaller vehicles from driving off the sides of the runways.

20,000 lbs. Capacity

  Super-strong truss-design runways provide 20,000 lbs. per axle capacity.
 
Level Accuracy
Level Accuracy

  Legs bolt directly to the bay floor for maximum strength. Each leg has a level adjustment for maximum level accuracy.
 
Front Wheel Stops
Front Wheel Stops

  Adjustable front wheel stops provide clearance during vehicle service operations.
Specifications
 

Max. vehicle gross weight: 
20,000 lbs. (9,072 kg) per axle 

Drive-on height: 
24 in. (610 mm) 

Runway width: 
33 in. (838 mm) 

Overall width: 
106 in. (2,692 mm) 

Distance between runways: 
40 in. (1016 mm)
(Installed width can be varied)

Overall length: (Standard configuration) 
403 in. (10,236 mm) 

Length of modular runway section: 
46 in. (1168 mm) 

Approach ramp angle: 
8° 

Power requirements: 
220V, 1ph., 20A

 

The RKHD fits a wide range of vehicle applications.

Configurations

 

SURFACE MOUNT

RKHD 
Includes pop-up ramps, turnplate sections and 4 runway sections. 

20-1780-2 
Pair of modular runway sections. Adds 46 inches to wheelbase capability.


PIT MOUNT

RKHD-P-24 
Pair of turnplate sections for 24-inch pit. 

20-1780-2 
Pair of modular runway sections for 24-inch pit. Adds 46 inches to wheelbase capability. 

RKHD-P-30 
Pair of turnplate sections for 30-inch pit. 

20-1783-2 
Pair of modular runway sections for 30-inch pit. Adds 46 inches to wheelbase capability. 

20-1781-2
 
Pit adaptor secures runway to pit back wall.

Jacks

133-77-2 
HD AC rolling pit jack, 35,200-lb. capacity. 

133-81-2
 
HD AC jack tray for 24-inch RKHD. 

133-76-2
 
HD conventional jack tray for 24-inch RKHD. 

When ordering jack guide rails, consult the 900D ordering guide to determine what should be ordered for your RKHD configuration.

Additional Options

20-2709-1

Two standard turnplates

20-2708-1

Two truck electronic turnplates

20-2710-1

Two audit turnplates; low friction / high durability

 
Standard configuration with four runway sections and popup section raised.
* This wheelbase shows a common 52-inch tandem spacing. Other tandem spacing will result in different wheelbase measurements.


Pit configuration: 24-in. and 30-in. RKHD pit versions are available.
This example shows a 30-inch pit with three runway sections.

NOTICE:

Product delivered to international markets may differ slightly in content to domestic product. Please consult your local distributor for details.

Tài liệu

4986

xem