Hotline: 090 343 3214

On - Car Brake Lathes

Key Features At A Glance
Pro-Comp® Compensation

  Simple runout compensation

  Quick setup
 
Reverse Rotation

  Easily service vehicles with excess driveline drag
 

QuickComp™ Adaptor


  Fast runout compensation

  Easy two-way adjustment

Powerful Motor and Drive

  1.5-hp motor provides unmatched speed and torque
 
Pivoting Control Module

  Operates upright on either side of the vehicle

  Easily accessible adjustments
   

 
Service Each Rotor in Less Than 9 Minutes!

Attach adaptor and lathe
 
Compensate lateral runout with single-point adjustment. 
 
Set cut depth and go. 

 
Anti-Chatter Technology

Fixed speed 
 
Oscillating speed 
   

  Oscillates machining speed to prevent buildup of vibration (chatter)

  Provides smoother surface finish

  Eliminates use of chatter bands

 
Variable-Speed Drive System

No decrease in quality of surface 
finish when speed is adjusted on the fly!

  Change speeds during machining

  Resurface rotors at fastest possible speed

  Service rotors on rear locking differentials without disconnecting the driveline

 
Precise Machining

Hunter staggered cutting pattern 
 
Typical spiral cutting pattern 
   

  Unique, staggered cutting pattern prevents radial "push-out" effect of typical spiral pattern

  Finished surface meets or exceeds OEM specifications

  Quality remains consistent regardless of cutting speed
 
 
QCL
 
QCLPAS
 
QCLPRO
Power Requirements   115V, 15A, 60Hz, 1 ph NEMA 
5-15P 
(230V, 50-60Hz optional)
  115V, 15A, 60Hz, 1 ph NEMA 
5-15P 
(230V, 50-60Hz optional)
  115V, 15A, 60Hz, 1 ph NEMA 
5-15P 
(230V, 50-60Hz optional)
Rotor Max Diameter   15.75 in. (400 mm) / 
16.25 in. (413 mm) *
  15.75 in. (400 mm) / 
16.25 in. (413 mm) *
  15.75 in. (400 mm) / 
16.25 in. (413 mm) *
Rotor Max Width   2.75 in. (70 mm) / 
3.25 in. (83 mm) *
  2.75 in. (70 mm) / 
3.25 in. (83 mm) *
  2.75 in. (70 mm) / 
3.25 in. (83 mm) *
Feed Distance   4.3 in. (109 mm)   4.3 in. (109 mm)   4.3 in. (109 mm)
Spindle Speed   Adjustible and auto 
variable (ACT), 
0-120 rpm reversible
  Adjustible and auto 
variable (ACT), 
0-120 rpm reversible
  Adjustible and auto 
variable (ACT), 
0-120 rpm reversible
Motor   1.5 hp (1.12 kw) 
@ 3450 rpm
  1.5 hp (1.12 kw) 
@ 3450 rpm
  1.5 hp (1.12 kw) 
@ 3450 rpm
Trolley Range High   32-45 in. (813-1143 mm)   32-45 in. (813-1143 mm)   32-45 in. (813-1143 mm)
Trolley Range Low   22-35 in. (559-889 mm)**   22-35 in. (559-889 mm)**   22-35 in. (559-889 mm)**
Shipping Weight   244 lbs (111 kg)   267 lbs (121 kg)   340 lbs (154 kg)
Width (W)   35 in. (889 mm)   35 in. (889 mm)   35 in. (889 mm)
Height (H)   47.5 in. (1,207 mm)   47.5 in. (1,207 mm)   47.5 in. (1,207 mm)
Depth (D)   41 in. (1,041 mm)   41 in. (1,041 mm)   41 in. (1,041 mm)
* With optional Extended Twin Cutter Tool Assembly (20-1853-1)
** With optional lowering kit installed.


QCLPRO 
 

On-Car Lathes Spec Sheet (.pdf)

Level I Adaptor Kit
Covers wide range of applications, fits most passenger-car and some light-truck 4x2 rotors (20-2084-1)

 

Level II Adaptor Kit
Covers wide range of applications, fits most late model passenger-car and light-truck 4x2 and 4x4 rotors, including some 1-ton applications 
(20-2085-1)

 

Level III Adaptor Kit
Covers wide range of applications, fits most late model passenger-car and light-truck 4x2 and 4x4 rotors, including some 1-ton applications 
(20-2086-1)