Hotline: 090 343 3214

Four - Post Lift Family

Key Features At A Glance
PowerSlide® Edition Saves Time and Hassle!

FIA / Inflation Station Edition Maximizes Productivity!
* Alignment console sold separately

18,000-lb. Capacity

  Best in class!
 
Integrated Air Line Kit
Integrated Air Line Kit

  Convenient power for air tools at front and rear
 
Louvered Locks

  Ensure runways are level at all 16 lock heights

  Galvanized cables for long life

Power Unit

  Powerful 3-hp motor

  Valve-controlled descent

  Filter/lubricator standard
 
Pins and Pulleys

  Large diameter iron pulleys with teflon bearings ensure long life

  Chrome-plated pins
 
Umbilical Covering

  Strong and flexible

  Protects air and hydraulic lines from damage

Open Front

  Allows easy access to adjustment points and jacks
 
Two Swing Air Jacks

  Lift vehicles off the runways

  9,000-lb. capacity
 
Extra-Wide Runways

  22 1/2" runways accept wide vehicles

  Rub rails enhance drive-on safety

Two Movable Work Steps

  12 secure positions

  Lightweight design
 
Flush Slipplates

  Wheelbases up to 158"

  Tethered pins secure plates on basic models
 
Louvered Ramps

  Prevent wheel spin

  More effective than diamond tread or abrasive strips
Specifications
    L441   L444

Max. vehicle weight

Max. wheelbase
General service
Two-wheel alignment
Four-wheel alignment

Min. four-wheel alignment

Max. lifting height

Alignment height

Minimum height

Overall height

Tread width
Min. inside
Min. outside

Motor

Air

 

18,000 lbs. (8164 kg)


193” (4902 mm)
177” (4496 mm)
158” (4013 mm)

88” (2235 mm)

75” (1905 mm)

Any of 16 lock positions

8 3/4” (222.25 mm) 

98” (2489 mm) 


40” (1016 mm) 
85” (2159 mm) 

3 hp, 208-230 VAC, 60 Hz, 1 ph 

80-125 psi

 

18,000 lbs. (8164 kg)


227” (5766 mm)
211” (5359 mm)
158” (4013 mm)

88” (2235 mm)

75” (1905 mm)

Any of 16 lock positions

8 3/4” (222.25 mm)

98” (2489 mm)


40” (1016 mm)
85” (2159 mm) 

3 hp, 208-230 VAC, 60 Hz, 1 ph

80-125 psi

 

L441 Specifications

Models

L441JT
L441 with (2) 9,000-lb. Swing Air Jacks and stainless steel turnplates

L441T-PS
L441 with (2) 9,000-lb. Swing Air Jacks and PowerSlide slipplates and turnplates

L441T-IS
L441 with (2) 9,000-lb. Swing Air Jacks, PowerSlide slipplates and turnplates, Inflation Station, and FIA

Standard Equipment

Stainless steel turnplates (PowerSlide turnplates on PS and IS models) 
Flush-mounted, full-floating slipplates (PowerSlide slipplates on PS and IS models) 
Louvered ramps with built-in wheel stops 
Front wheel stops 
Two wheel chocks 
Two movable work steps 
Built-in, full-length jack rails 
Built-in rub rails 
Built-in air line kit

Options

20-1365-1 
17.5” Ramp Extension Kit (for low-clearance vehicles)

20-2033-1 
40” Ramp Extension Kit (for extremely low-clearance vehicles or high-floor-slope situation)

 
The Hunter L441 Lift has been certified under the program conducted by Automotive Lift Institute (ALI) and ETL Testing Laboratories, to comply with Safety Standard ANSI/ALI ALCTV- 2006 and Electrical Standard ANSI/UL 201.
 

L444 Specifications

 

Models

L444JT 
L444 with (2) 9,000-lb. Swing Air Jacks and stainless steel turnplates

L444T-PS 
L444 with (2) 9,000-lb. Swing Air Jacks and PowerSlide slipplates and turnplates

L444T-IS 
L444 with (2) 9,000-lb. Swing AirJacks, PowerSlide slipplates and turnplates, Inflation Station, and FIA

Standard Equipment

Identical to L441 Lift Rack.

Options

Identical to L441 Lift Rack.

validated by etl - ali certified
The Hunter L444 Lift has been certified under the program conducted by Automotive Lift Institute (ALI) and ETL Testing Laboratories, to comply with Safety Standard ANSI/ALI ALCTV-2006 and Electrical Standard ANSI/UL 201.
 
* See L441 Section for Elevation View
 

Two Swing Air Jacks 
Hunter Swing Air Jacks add capabilities for lifting vehicles off the runways during alignment procedures and other multi-service operations.

The heavy-duty Swing Air Jack has a capacity of 9,000 lbs. (4,082 kg) and combines low drive-on height with high lifting capacity needed to handle a wide range of vehicles.

133-83-1 – 9,000-lb. Capacity Swing Air Jack

 

AlignLights System 
Hunter’s AlignLights lighting system provides an efficient light source underneath the vehicle.

AlignLights is powered by the main lift power source a nd requires no additional or exposed electrical cords.

AlignLights automatically turns off when the lift is lowered to the floor and turns on when the lift is raised.

AlignLights is an ALI listed accessory.

20-2377-1
AlignLights system for four-post lifts

 

Turnplates 
All L441T and L444T models will ship with the most appropriate turnplates. When making a substitution, any of the following turnplates may be used.

Integrated bridge lowers and raises as plates are locked, making rolling compensation a snap. Air-operated control system ties directly into PowerSlide lifts 
(20-2076-1 shown).


20-2076-1 PowerSlide Turnplates with Automatic Bridges 
Two stainless steel turnplates for camera-sensor systems.

20-2075-1 PowerSlide Turnplates without Automatic Bridges 
Two stainless steel turnplates for conventional-sensor systems.

20-2532-1 Stainless Steel Turnplate Kit 
Two stainless steel Delrin-ball turnplates and bolt-on guide strips.

20-2533-1 Low-Friction Stainless Steel Turnplate Kit 
Two stainless steel Torlon ball turnplates and bolt-on guide strips.

20-2531-1 Powder-Coated Turnplate Kit 
Two powder-coated, Delrin-ball turnplates and bolt-on guide strips.